IDEA, Inc.
1351 Titan Way, Brea, California 92821
714-525-3302 or 800-533-IDEA
for better printing
LED Indicator, J2178B Series
The J2178B series is an assembly using two 2 x 3 mm LEDs in a right-angle mount. Designed to save panel space, the assembly measures just over 4.3 mm(0.170") in width. Long arrays should be located on a pitch of 4.4 mm(0.173") to avoid crowding and tolerance build-up. This series can also be supplied with pinout reversed from that shown by adding "-RL" to the order code of the part number.
Specify part desired as follows:
J2178B/Order Code LED1 + Order Code LED 2
For example: "J2178B/G+Y" designates an assembly with a green LED on top and a yellow LED on the bottom.
"J2178B/(G+Y)-RL" designates the same assembly with leads reversed.
|
LED Lamp |
Typical Characteristics |
Recom. |
|||||
|---|---|---|---|---|---|---|---|
|
Epoxy & Type |
Color |
Order Code |
Peak |
Vf (V) |
Iv (mcd) |
|
|
|
|
@If=20mA |
@If= 2 mA |
(Deg) |
||||
|
TInted Diffused Resistor Required |
Red |
I |
639 |
1.8 |
4.0 |
50 |
2-10 |
|
Green |
G |
575 |
1.7 |
2.5 |
60 |
2-10 |
|
|
Yellow |
Y |
591 |
1.85 |
4.0 |
45 |
2-10 |
|
* Specifications subject to change without notice. Dimensions are in mm +/- 0.25 mm unless stated otherwise.