LED Indicator, J94B Series
The J94B is a right-angle view assembly of 4 T-1 LEDs arranged in a column. This indicator array is designed to be the extension of the G78B and G83B. When used in conjunction with the G78B and/or G83B the lower LEDs line up both vertically and horizontally with the lamps in the latter. Recommended pitch is 4.4 mm(0.173") when a large number of units are placed side-by-side. This would allow intermixing 4-high, 3-high and 2-high indicators on the same panel.
Specify part desired as follows:
J94B/Order Code LED1 + Order Code LED 2 + Order Code LED 3 + Order Code LED 4
For example: "J94B/I+Y+2G" designates an assembly with a red LED on top, a yellow LED in the middle and 2 green
LED's on the bottom. Note: Special lead length lamps are needed for position 1. Limited choices only.
LED Lamp |
Typical Characteristics |
Recom. |
|||||
---|---|---|---|---|---|---|---|
Epoxy & Type |
Color |
Order Code |
Peak |
Vf (V) |
Iv (mcd) |
|
|
|
@If=20mA |
@If= 2 mA |
(Deg) |
||||
TInted Diffused Resistor Required |
Red |
I |
639 |
1.8 |
4.0 |
50 |
2-10 |
Green |
G |
575 |
1.7 |
2.5 |
60 |
2-10 |
|
Yellow |
Y |
591 |
1.85 |
4.0 |
45 |
2-10 |
* Specifications subject to change without notice. Dimensions are in mm +/- 0.25 mm unless stated otherwise.