G30B and G32XB Series
The G30B is made up of a 10 LED lamps. The design of the G30B precludes cutting of the holder to make different length units. The G32XB is made up of a maximum of 10 lamps per array. The G30B array has a shoulder top and bottom. The leads can be formed to allow right angle mounting if desired.
Specify part desired as follows: (X = total number of LEDs in array, 10 only for G30XB and up to 10 for G32XB.)
G30B(or G32XB)/Order Code LED1 + Order Code LED 2 + ... + Order Code LED X
For example: "G3210B/4I+4Y+2G" designates an assembly with 4 red, 4 yellow, and 2 green LEDs in that order
G30B(or G32XB)/Order Code LED1 + Order Code LED 2 + ... + Order Code LED X
For example: "G3210B/4I+4Y+2G" designates an assembly with 4 red, 4 yellow, and 2 green LEDs in that order
|
LED Lamp |
Typical Characteristics |
Recom. |
|||||
|---|---|---|---|---|---|---|---|
|
Epoxy & Type |
Color |
Order Code |
Peak |
Vf (V) |
Iv (mcd) |
|
|
|
|
@If=20mA |
@If=10mA |
(Deg) |
||||
|
G30XB Tinted Diffused Resistor Required |
Red |
H |
697 |
2.1 |
0.8 |
130 |
5-10 |
|
Hi Eff Red |
I |
635 |
2.0 |
2.5 |
130 |
10-20 |
|
|
Green |
G |
565 |
2.1 |
2.5 |
130 |
10-20 |
|
|
Yellow |
Y |
585 |
2.0 |
2.5 |
130 |
10-20 |
|
|
G32XB Tinted Diffused Resistor Required |
Red |
H |
697 |
2.1 |
0.5 |
124 |
5-10 |
|
Hi Eff Red |
I |
635 |
2.0 |
1.0 |
124 |
10-20 |
|
|
Green |
G |
565 |
2.1 |
1.0 |
124 |
10-20 |
|
|
Yellow |
Y |
585 |
2.0 |
1.0 |
124 |
10-20 |
|
* Specifications subject to change without notice. Dimensions are in mm +/- 0.25 mm unless stated otherwise.