G70F Series
The G70F panel mount assembly is designed to snap into a nominal 1/4" hole from the front of the panel. The wires are UL 1061, 26 AWG, PVC insulated multi-strand wire with 3 mm ends stripped & tinned. The G70F is available in a variety of colors as well as a superbright lamp incorporating a built-in flashing circuit.(Order Code FSR) The G70F is ideal for applications where wide viewing angle and a low profile is desired.
Specify part desired as follows:
G70F/Order Code-L (Wire length in inches; 6" and 24" are standard)
For example: "G70F/FSR-24" designates a flashing superbright red lamp with 24" long wires attached.
G70F/Order Code-L (Wire length in inches; 6" and 24" are standard)
For example: "G70F/FSR-24" designates a flashing superbright red lamp with 24" long wires attached.
|
LED Lamp |
Typical Characteristics |
Recom. |
|||||
|---|---|---|---|---|---|---|---|
|
Epoxy & Type |
Color |
Order Code |
Peak |
Vf (V) |
Iv (mcd) |
|
|
|
|
@If=20mA |
@If=10mA |
(Deg) |
||||
|
TInted Diffused Resistor Required |
Red |
H |
697 |
2.1 |
0.5 |
120 |
5-10 |
|
Hi Eff Red |
I |
635 |
2.0 |
3.0 |
120 |
10-20 |
|
|
Green |
G |
565 |
2.1 |
3.0 |
120 |
10-20 |
|
|
Yellow |
Y |
585 |
2.0 |
3.0 |
120 |
10-20 |
|
|
Super Red |
FSR |
660 |
3-5 Volts |
Flashing |
120 |
4 Volts |
|
* Specifications subject to change without notice. Dimensions are in mm +/- 0.25 mm unless stated otherwise.