Right Angle Indicator, J61B Series
The J61B is a T-1 size right-angle indicator suitable as logic status, position, or fault indication. The J61B has the lamp located at 5.08mm(0.2") above the PCB, which matches the G61XB and the G95XB series in height. For easier handling in multiple applications, refer to the G61XB specifications. The J61B series can be supplied with pinout reversed from that shown by adding "-RL" to the order code.
Specify part desired as follows:
J61B/Order Code
For example: "J61B/G" designates an assembly with a standard diffused green LED.
"J61B/G-RL" designates the same assembly with pins reversed
J61B/Order Code
For example: "J61B/G" designates an assembly with a standard diffused green LED.
"J61B/G-RL" designates the same assembly with pins reversed
|
LED Lamp |
Typical Characteristics |
Recom. |
|||||
|---|---|---|---|---|---|---|---|
|
Epoxy & Type |
Color |
Order Code |
Peak |
Vf (V) |
Iv (mcd) |
2θ½ |
|
|
λ (nM) |
@If=20mA |
@If=10mA |
(Deg) |
||||
|
TInted Diffused Resistor Required |
Red |
I |
639 |
1.8 |
4.0 |
50 |
2-10 |
|
Green |
G |
575 |
1.7 |
2.5 |
60 |
2-10 |
|
|
Yellow |
Y |
591 |
1.85 |
4.0 |
45 |
2-10 |
|
* Specifications subject to change without notice. Dimensions are in mm +/- 0.25 mm unless stated otherwise.